Bones Consulting and Diagnostics
Switchboard Testing Support That Keeps Projects Moving

Switchboard testing is meant to clear the final path toward energization, inspection and handover. One failed breaker can interrupt that sequence immediately.

When that happens, the issue must be verified, documented and explained in terms that the manufacturer, contractor and inspection team can act on. For the contractor, the failure is no longer only technical. It becomes a closeout problem tied to schedule, accountability and the next step required to move the project back toward approval.

Bones Consulting and Diagnostics built its model around that moment, the point where a failed switchboard test becomes a series of critical decisions. The company has become a trusted provider of code-compliant special inspections and switchboard high-potential testing for commercial, industrial and public sector projects.

Its value lies in its approach to the work. It is not a single test followed by a report. Field support helps contractors understand the results, communicate them clearly and continue through closeout with fewer blind spots.

“No contractor should leave a site uncertain about what happens next,” says Dan Moffett, Owner and Member-Manager, NICET IV. “They need to understand what failed, why it failed and what steps will move the project toward the final pass.”


A recent project illustrates that approach. Bones Consulting and Diagnostics was performing ground-fault testing and high-potential testing when three breakers failed ground-fault testing. The contractor needed more than confirmation of the failure. Moffett’s team clarified the findings, guided the replacement process and contacted the manufacturer directly, so the contractor was not left to interpret technical paperwork or determine the next step on their own.

For smaller and mid-sized electrical contractors, that level of support can be the difference between holding a failed test and knowing how to move the job forward. Bones Consulting and Diagnostics brings fast scheduling, clear reporting and hands-on guidance to contractors who need the same attention larger providers often reserve for bigger projects.

Built Around Contractors Others Overlooked

Moffett did not start Bones Consulting and Diagnostics to imitate large testing firms. He started it because he saw who they were leaving behind.
After years inside large organizations that once served electrical crews of all sizes, he watched those firms shift toward industrial and utility-scale work. Smaller commercial teams became harder to serve profitably. Their jobs were shorter, their schedules tighter and their needs more hands-on.

Contractors felt the shift immediately. Scheduling took longer. Minimum charges became harder to absorb. Technical guidance became scarce. When smaller firms began taking on larger commercial projects, they encountered municipal testing requirements and special inspections they had never seen before.

Most did not discover those requirements during bidding or planning. They discovered them when the closeout stalled.

Moffett understood the problem from the contractor’s side. Smaller firms were not asking for special treatment. They needed someone who understood municipal requirements, could schedule quickly, could explain test results clearly and could help them move through closeout without turning every issue into a delay. Bones Consulting and Diagnostics grew from that need.

“We serve the teams who know how to build the work,” says Moffett. “They should not have to become experts in compliance, manufacturer processes or municipal testing just to finish a job.”

A Conversation Before a Test

When a contractor reaches out, Moffett’s first concern is time. A job waiting for a scheduling answer is already losing momentum. His next concern is context. Two projects may both require switchboard high-potential testing, but no two jobs share the same field conditions, equipment status, municipal expectations or inspection deadlines.

Bones Consulting and Diagnostics reviews those details before stepping onto the site and shapes the work around the project rather than forcing every job through the same process.

The firm performs switchboard high-potential testing, ground-fault system testing and municipality-required electrical special inspections. When needed, it identifies additional NEC required verifications that could affect inspection outcomes and gives contractors a chance to address issues before they become delays.

That early clarity matters because many closeout problems begin with small assumptions. A contractor may believe a clean installation guarantees a clean inspection. It usually does, but a missing torque record, an unverified ground-fault pickup setting or a mislabeled section can still hold up energization.

“We help project teams catch those items early,” says Moffett.

When results are clean, the team prepares documentation for municipal review and closeout, often the same day. Contractors working inside narrow inspection windows depend on that speed.

Protecting the Schedule Behind the Electrical Scope

A delayed test result rarely affects only one trade. When electrical closeout stalls, permanent power waits. HVAC startups shift. Fire alarm commissioning gets pushed. Low-voltage cutovers move. Turnover dates tighten. A report that arrives three days late creates pressure across the entire jobsite.

Bones Consulting and Diagnostics understands that construction schedules do not pause for paperwork. It keeps lead times short and delivers same-day reporting on straightforward high-potential work when possible. That speed comes from experience. Smaller commercial projects often require fewer coordination layers and Moffett’s team knows how to move through field conditions quickly without sacrificing accuracy.

The firm is also built around the realities contractors face. Night work, compressed schedules and last-minute inspection requests are part of commercial construction. Bones Consulting and Diagnostics responds to those pressures without treating them as exceptions.

That mix of technical skill, fast response and post-failure support helped the company earn a place on Electrical Business Review’s Top Switchboard Hipot Services of 2026 list.

The Person Contractors Can Reach

One frustration Moffett hears repeatedly is that many firms can schedule a test, but few take the time to explain what the results actually mean.

Moffett handles those calls as part of the job. He stays reachable before, during and after the work. He helps contractors understand what a municipality is requesting, what a special inspection involves and what documentation they will need before closeout.

Some contractors call before bidding to understand a requirement early. Others call after learning they need a special inspection and are unsure what that means. Bones Consulting and Diagnostics helps them plan with confidence in either case.

A Different Kind of Testing Partner

Bones Consulting and Diagnostics continues to grow across Arizona by serving contractors who want more than a pass-or- fail document.

Its work begins with the test and continues through the subsequent questions. It helps project teams understand requirements, avoid preventable inspection delays and respond when equipment fails. It knows how to speak to manufacturers, prepare documentation for municipal review and keep a contractor from being stranded between a failed result and a finished job.

Many providers compete on scale. Bones Consulting and Diagnostics competes on availability, technical clarity and follow-through. It is there when a contractor needs answers, can explain what a result means and is ready to stay with a project when something fails.

Contractors who work with Bones Consulting and Diagnostics do not face manufacturers, municipalities or inspection timelines alone.